Connect with us

Lighting project help

Discussion in 'LEDs and Optoelectronics' started by Striker, May 30, 2012.

Scroll to continue with content
  1. Striker


    May 30, 2012
    I currently have available a 12V DC source and from that I want to power 3 LED strips but I want to be able to either have them all on at the same time, blink the strips in a pattern, or have them off. I have done some research into 555 timers but it looks like they wont be able to handle the current. I'm looking for some ideas on how I can implement this simply and keep it on the cheap side.
  2. CocaCola


    Apr 7, 2012
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day