Leds

TORRANCE, CA - August 29, 2007 - LEDtronics® announces the release of
its new Flashing LED Chevron Arrow Mat. This convenient, portable,
lightweight LED Arrow Mat has three different safety Light Modes of
operation: 1. Sequential LED Arrow Flash Mode; 2. All LED Arrows
Flashing in Unison Mode; and 3. All LED Arrows Always On Mode. Since
LEDs are solid-state devices that offer high shock and vibration
resistance the LED mat is the ideal safety item for all motorists,
police, truck drivers, utility workers, and emergency personnel.

The energy-efficient Flashing LED Chevron Arrow Mat operates with
three replaceable AA-cell batteries for nearly 72 hours in the arrows-
sequentially-flashing mode, 48 hours with all arrows flashing in
unison, and up to 6 hours in the arrows-always-on mode (batteries are
not included). LED Arrow Mat has eight magnetic pads that allow
attachment to ferric-metallic surfaces, and eight half-inch eyelets
for fasteners making it a reliable, easily installed safety light
source that provides; a direction to an event location, a warning sign
for delivery-service loading/unloading, a traffic director for road
detours, and a roadside-emergency traffic diverter.

It is 44.9 inches long and 19.7 inches high. Made of a foldable, soft
red nylon material, the LED Arrow Mat comes with a handy 23.5-inch by
13.2-inch storage bag. On the mat are four reflective chevron arrows
that have nine Super Red LEDs per arrow for a total of 36 LEDs. Each
LED puts out a total intensity of 4000-to-5000 mcd.

With an average LED lifespan of up to 100,000-plus hours (11 years),
LEDs operate reliably year after year. Solid-state design renders LEDs
impervious to electrical and mechanical shock, vibration, frequent
switching and environmental fluctuation. LED lamps use only 10% - 20%
of the energy consumed by equivalent incandescent lamps that -
combined with their maintenance-free operation - lead to substantial
cost savings.


Founded in 1983, LEDtronics® leads where others only follow when it
comes to designing, manufacturing and packaging state-of-the-art LED
bulbs and lamps to meet the world's constantly changing lighting
needs. Our inventive product line encompasses an array of direct
incandescent lamp replacement Based LED bulbs, low-cost snap-in and
relampable Panel Mount LED lamps, high-intensity sunlight-visible
Discrete LEDs, circuit-board status-indicator PCB LEDs, surface mount
diode SMT LEDs, full-spectrum rainbow RGB LEDs, Ultraviolet (UV), and
Infrared (IR) LEDs.


The price for the LED Chevron warning mat is $45.90 each. Availability
is stock to 4 weeks for special requirements. For additional
information contact LEDtronics toll free at 1-800-579-4875, telephone
310-534-1505, fax at 310-534-1424 or mail to LEDtronics Inc., 23105
Kashiwa Court, Torrance, CA 90505. Visit our website at www.ledtronics.com.

The direct web link to the online datasheet is as follows:
http://www.ledtronics.com/ds/CHEVRON-4-RED-01/default.asp