Maker Pro
Maker Pro

Led sequencer/scanner

zenith

Nov 3, 2012
29
Joined
Nov 3, 2012
Messages
29
Thank you both again, the link you supplied KJ6EAD, was very useful to me.

I'm going to go with the pot I think, I have almost all the parts now, so will update as soon as I get it built :D
 

zenith

Nov 3, 2012
29
Joined
Nov 3, 2012
Messages
29
I have now completed the lighting circuits for the cycle and trailer, so a quick thank you to all who helped, KrisBlueNZ, KJ6EAD, (*steve*) and CocaCola.

The triple front lights now has a strobe on one light and I can have 1, 2 or 3 lights on at a time, the rear array I set them as 2 rows of chevrons, one reversed, >>>><<<< they work really well.

So far they have run for around 3 hours and still seem to be as bright as when I started.

Doing this project has given me a whole load of other projects, mostly LED, so I will be back to bug you all soon. :)

Btw Kris I managed to talk Maplins into donating a piece of stripboard, so my budget is unused. :p
 
Last edited:
Top