Maker Pro
Maker Pro

LED light receiver

colum

Jul 25, 2013
175
Joined
Jul 25, 2013
Messages
175
I have a robotic arm that aims a Red LED at a dart board and works very well.
I need a Diode that receives this light .
is there a circuit or Diode that I can use to activate a visible LED to indicate a bullseye
Thank you for reading this .....Jeff

Thanks Steve for teaching me how to hook up a string of LEDs
 

HellasTechn

Apr 14, 2013
1,579
Joined
Apr 14, 2013
Messages
1,579
Are you sure there is a LED on the arm ? I beleave you can have far better acuraccy and distance with a laser diode and an ldr.
 
Last edited by a moderator:

colum

Jul 25, 2013
175
Joined
Jul 25, 2013
Messages
175
Thanks Constatine I meant to say I was using a red Laser...colum
 

colum

Jul 25, 2013
175
Joined
Jul 25, 2013
Messages
175
Thanks Harold I Googled it and its exactly what I needed.....Jeff
 
Top