led drivers

[redfox26]

hi


i have a battery of 14.4V and 10Ah.
i would like to use a led who accept 2.4A (12-V).


so i think i need to use a buck driver, because volt battery is higher then led one.


i will use maybe: H6Flex
http://www.taskled.com/h6flex.shtml


this driver support 7V to 25V and 6.6A (max)


6.6A is about the del who are 2.4 A or is about the battery i could use?

 

[Arouse1973]

Hello
That looks ok. The 6.6 A is the maximum current you can draw.
Thanks
Adam