Connect with us

Led Disco Lights

Discussion in 'LEDs and Optoelectronics' started by Alex_DJ, Sep 16, 2018.

Scroll to continue with content
  1. Alex_DJ


    Sep 16, 2018
    I run a retro Mobile Disco in the UK (240V) l have bought some R60 LED reflector spots to replace the incandescent ones These are run off a quality 3-channel light controller that can control both resistive and inductive lamps When I run them on a slow chase the ones not on the operating channel flicker.. If I plug another lightbox into the circuit that has 15W incandescent lamps in it the flickering stops I presume then I need to put something in the circuit between the controller and the lamps??
    Your help appreciated
  2. Externet


    Aug 24, 2009
    Led lamps on 230V may have a delay to turn on, messing up the intended effect.
    What is the behavior if you install one incandescent and the rest LED on each channel ?
  3. Alex_DJ


    Sep 16, 2018
    They work perfectly when even a 15W incandescent lamp is connected...They also flash perfectly on sound activated function
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day