Connect with us

led controller

Discussion in 'LEDs and Optoelectronics' started by sheldonstv, Apr 5, 2013.

Scroll to continue with content
  1. sheldonstv

    sheldonstv

    68
    0
    Jul 17, 2007
    Last edited: Apr 5, 2013
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,513
    2,651
    Nov 17, 2011
    The images are rather noisy and not too sharp. The solder work looks quite o.k.

    You made good use of the stripboard. Personally I prefer perfboard without the strips. I use magnet wire for routing. Admittedly a bit more work, but gives me more freedom in the placement of the components.
     
  3. sheldonstv

    sheldonstv

    68
    0
    Jul 17, 2007
    i generally use veroboard as its very easy to use ,used it for a good number of years now although i have done my own pcbs when needed but mainly its veroboard. My mobile isnt all that good photo wise tho...
     
  4. CDRIVE

    CDRIVE Hauling 10' pipe on a Trek Shift3

    4,960
    652
    May 8, 2012
    Nice work.....I think. I can't really say because, as Harald said, the pix aren't very good. Loose the phone cam! :eek:

    Chris
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-