Connect with us

LED control

Discussion in 'Electronic Design' started by Krish, Dec 11, 2003.

Scroll to continue with content
  1. Krish

    Krish Guest

    how to control a bank of leds, switiching from one banking to other
    and their intensity, using cheapest and simplest hardware.
    any help most welcomed
    kristo
     
  2. Banks of two, or banks of 10,000? Can their intensity be varied by
    pulsing them on and off for various brief amounts of time, (so that
    the flicker is not noticeable to the eye, or is this for a camera use,
    where flicker will beat with the frame rate? Need details.
     
  3. In lieu of that: toggle switches and resistors.
     
  4. Peter Lowrie

    Peter Lowrie Guest

    Aha, exactly the type of application of which the much derided LED
    Accelerator would be perfect.

    2c
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-