Connect with us

LCR 10Hz 100Hz etc with bias control

Discussion in 'Electronic Equipment' started by WayneL, Feb 10, 2006.

Scroll to continue with content
  1. WayneL

    WayneL Guest

    Hi


    Does anyone know where I can buy a new LCR bridge that has selectrable
    frequecies from apx 10Hz up to say 1KHz and adjustable bias or biased from
    external source? RS232 would be a bonus.
    Any link greatle appricated, anywhere in the world.

    Cheers


    WayneL
     
  2. WayneL

    WayneL Guest

    PS

    Low cost!
     
  3. WayneL wrote...
    Most commercial instrument specs start at 50, 60 or 100Hz. Are you
    sure you need 10Hz capability? Most inductors and capacitors don't
    change their LCR properties significantly below 100Hz.
     
  4. WayneL

    WayneL Guest

    I do not want it for commercial parts.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-