Connect with us

LCD - Touchscreen - DVI - RS232

Discussion in 'Troubleshooting and Repair' started by coolday_pt, Mar 15, 2013.

Scroll to continue with content
  1. coolday_pt


    Mar 15, 2013
    Hey guys,

    I´m new to this forum, but I got a NCR POS with Touchscreen.

    I want to set it up in a way I can use it as an external touch screen to do photo editing, built into my computer desk.

    After taking it apart, i found it has an dvi connector, but the Pinouts are completely mixed up (I think custom design).

    So, I kind of need your help figuring out how I can connect it to my graphics card with an additional rs232 cable, and connect it to my desktop.

    Should I just throw away the existing connector and solder another cable on the pcb, or is it possible to identify the pinout and re-wire the connector?

    Thank you guys... :)

    Attached Files:

    Last edited: Mar 15, 2013
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day