Maker Pro
Maker Pro

lcd tft panel sharp model # lm80c032

F

fingaz22

Jan 1, 1970
0
i'm tring to take a composite video signal say from a dvd player and
turn it into a rgb datastream or something this flat panel tft i have
can use to reproduce.

the panel has a 31 pin connector on the back of it and 16 of those pins
are for the rgb, 4 for each ,making up the 12 bit monitor that it is, 2
for the horizontal & vertical sync signals , 1 for the clock signal , 1
to settle the horizontal display position and a few for power & grds.
the others are test pins.

so looking for a convertor or what i would need to do to accopmlish
this project. thank you very much for your time.
 
Top