Connect with us

LCD Projector

Discussion in 'Troubleshooting and Repair' started by deat66, Jan 20, 2011.

Scroll to continue with content
  1. deat66

    deat66

    19
    0
    Jan 20, 2011
    Good Afternoon,

    I have a NEC LT260 LCD projector that in the past has "overheated"

    Currently it works EXCEPT all the colors are off and everything has a green tint, fairly severe.

    Any troubleshooting thoughts would be greatly appreciated.

    Thank you,

    David
     
  2. deat66

    deat66

    19
    0
    Jan 20, 2011
    No thoughts??
     
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,418
    2,788
    Jan 21, 2010
    Display a test pattern and determine if red and blue are weak, or if they look greenish.

    If they look greenish, you may have had some magic smoke leave a greenish layer on a lens.

    If there is no green tinge on red or blue then you may be able to find colour adjustments that vary the gain on each channel. Turning down the green (or the red and blue up) may be a solution.
     
  4. davenn

    davenn Moderator

    13,671
    1,892
    Sep 5, 2009
    Hi David,

    is this a DLP type projector or one with a split lightpath going through a prism and 3 individual LCD panels .. one for each colour, red, green, blue.

    I used to repair these things all day every day for another company and a common problem caused by overheating was damage to 1 or more of the LCD panels wich would result in green/red or blue colour tinge.
    The overheating was normally caused by a unit well blocked up with dust in the filters and around the 3 LCD panels.
    The only way to get rid of the colour tinge was to replace the faulty LCD panel.

    What did you mean by ... "all the colors are off " ? offcentre ? as in out of alignment ?

    Dave
     
  5. deat66

    deat66

    19
    0
    Jan 20, 2011
    Thanks that seems to be the issue - damaged lcd's from heat
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-