Connect with us

Lcd problem

Discussion in 'Troubleshooting and Repair' started by canactech, Jul 7, 2009.

Scroll to continue with content
  1. canactech


    Jul 7, 2009
    It's my first time with you and my first look at your site is very good.

    I have a LCD monitor, NEC Accusync LCD52V who's work fine for about half an hour, but after that it close and go on two or three times and cease for five minutes and this procedure restart after that, when the unit goes down, the poser light doesn't work, like if I was pushing the power button. I replace the Power/Inverter but the problem remains. I replace all the capacitors on the logic board but with no results.

    Everything looks good, the connectors are tight, and there is no components that seems to overheat.

    I hope that someone will be able to give me some solutions to this problem because I don't want to replace all the parts to find the problem.

    Tank you very much for your help.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day