Maker Pro
Maker Pro

LCD/Nema display

D

dbp

Jan 1, 1970
0
With the cost of instrument maxis (mast displays) so high, has anyone out
there come up with a simple solution? It seems like it would be fairly easy
to have a program to read and direct the NEMA sentence to a commonly
available LCD display. Use a plam pilot or similar to run a selection of
what to display and to direct the info to a display. Any ideas?
 
R

Rodney Myrvaagnes

Jan 1, 1970
0
With the cost of instrument maxis (mast displays) so high, has anyone out
there come up with a simple solution? It seems like it would be fairly easy
to have a program to read and direct the NEMA sentence to a commonly
available LCD display. Use a plam pilot or similar to run a selection of
what to display and to direct the info to a display. Any ideas?
Commonly available cheap LCD panels can't be seen in sunlight.



Rodney Myrvaagnes NYC J36 Gjo/a

"Happy is he that taketh thy little ones and dasheth them upon the stones." __Psalm 137
 
P

Peter Bennett

Jan 1, 1970
0
With the cost of instrument maxis (mast displays) so high, has anyone out
there come up with a simple solution? It seems like it would be fairly easy
to have a program to read and direct the NEMA sentence to a commonly
available LCD display. Use a plam pilot or similar to run a selection of
what to display and to direct the info to a display. Any ideas?

The NMEA-0183 data format is described in my NMEA FAQ (on my GPS/NMEA
site below), and I have some links to companies that make NMEA
displays.


--
Peter Bennett, VE7CEI
peterbb (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
 
Top