Connect with us

LCD modules

Discussion in 'General Electronics Discussion' started by jerime_ifill, Apr 8, 2009.

Scroll to continue with content
  1. jerime_ifill

    jerime_ifill

    1
    0
    Apr 8, 2009
    Hi there, i am using a powertip LCD module and a pic 16f870, running the necessary outputs off of port b, using a standard 4-bit interface. the module was working perfectly fine until the other day, where without any change to the code, the module decided to only display the first 8 characters on either line. i am baffled as to why this could happen:confused:. any insight would be greatly appreciated, i am sure there must be some much more experienced people on here that can point out my oversight.

    thanks for your time.
    Jerome
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-