Connect with us


Discussion in 'Electronic Design' started by john, May 5, 2006.

Scroll to continue with content
  1. john

    john Guest


    I have an interview coming up in a month regarding layout or printed
    circuit board designer. I need to prepare for the interview. I have a
    two year experience of working with Orcad capture and OrCAD layout
    plus. Can anybody adivce me that how and what to prepare for the
    interview. any web site, FAQ, books, literature . Thanks John
  2. Just say that, though current may pass through traces, energy passes
    through the space around them. Good layout requires that one envision
    the energy around the traces, and what it couples into. If you can do
    that, and also keep I*R drop in mind, you will do fine.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day