Maker Pro
Maker Pro

Large stepper motors urgently required locally

G

Geoff

Jan 1, 1970
0
We are desperate to get this months production out, but are
short one stepper motor which is delayed now due to the tsunami.

The motor is Oriental PK296-01B
2.2 ohm
4.4 V
2A
2.2Nm torque (305 oz-in)
85mm wide
66mm deep
double shaft dia 14x37 long

or similar. We are after about 20, within 2 weeks preferable. We
are still scouring the internet ourselves for some stocked
anywhere , or for a close equivalent. The drive is PWM voltage
source.
 
Top