Connect with us

Large Led display

Discussion in 'Electronic Design' started by Bill Volz, Aug 26, 2007.

Scroll to continue with content
  1. Bill Volz

    Bill Volz Guest

    I have a Netbrite led display but it looks like it requires some very
    expensive software to operate. I was wondering if there was a way I could
    get it working without the software. Below is a link to whats left of the
    web site. It has a built in ethernet connection, which works and allows me
    to telnet in to it. The problem is you can only change basic settings in
    there like IP address, gateway, etc.. I was wondering if anyone has seen
    one of these and has any insight before I start disassembling it.

    Thanks

    http://www2.symon.com/netbrite/download.htm

    Also I tried to contact them but it seems they only deal with large high
    paying customers and helping me would be an inconvience.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-