Connect with us

Laptop LCD

Discussion in 'Electronic Repair' started by John, Jan 8, 2009.

Scroll to continue with content
  1. John

    John Guest


    I have a laptop and the video ribbon cable got messed up.

    I then purchased a new one and looked at the diagram online etc.

    It appears that I need to connect it to the motherboard underneath the
    keyboard and then to the back of the LCD.

    My question is this:

    Is it safe to work on the LCD with the battery out of the laptop and
    power off of course... meaning could I be shocked at all?

    Any help would be appreciated.

    I'm new to repairs. The laptop is really old and not worth that much
    so I don't care if it doesn't work and I don't want to take it to a
    repair shop.

  2. Adrian C

    Adrian C Guest

    Stop! Get the service manual. What is the make and model?
  3. 1D10T

    1D10T Guest

    Das Machine is nicht fur gefingerpoken und mittengrabben. Ist easy schnappen
    der springenwerk, blowenfusen und poppencorken mit spitzensparken. Ist nicht
    fur gewerken by das dummkopfen. Das rubbernecken sightseeren musten keepen
    das cotten-pickenen hands in das pockets - relaxen und watchen das
  4. Adrian C

    Adrian C Guest

    Dell Lattiude LS what? Mever mind, hope you found the troubleshooting
    section of the manual and followed the cautions.
    Does not sound good that. You sure you haven't whacked the brightness on
    full, or switched video output to an external monitor, or jammed the lid
    switch? or used the cable for the wrong type screen or something?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day