Connect with us

Lamp "tap" switch is switching on by itself

Discussion in 'Troubleshooting and Repair' started by PaddyB, Feb 23, 2017.

Scroll to continue with content
  1. PaddyB

    PaddyB

    1
    0
    Feb 23, 2017
    I have a lamp that is switched on by giving it a light tap. It has four settings. First tap switches on at low intensity. Next two taps make the lamp brighter and the last tap switches the lamp off. Recently the lamp has been misbehaving in that, of its own accord, it switches itself on. Can anyone tell me why this might be and what I could possibly do to correct it? Thank you
     
  2. Bluejets

    Bluejets

    4,406
    933
    Oct 5, 2014
    Interference in the mains can make these things go belly-up. Electrical noise from unsuppressed series motors, electric welders etc etc. May not be in your residence.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-