Laird BTM511 bluetooth module

Hi,

I've recently got the Laird BTM511 pcb mount bluetooth module. So I've looked at the hardware pdf (http://www.elhurt.com.pl/wireless/f...df?PHPSESSID=cbf7ad8f8d00367ed557a32d0e796446) and saw an intense circuit schematic for a development board for the manual.

Now, I only need this module to connect with an microcontroller over UART and send data (not all the speaker and microphone capability). So I want to create a very simple pcb schematic to mount the module on, and interface (UART) between the module and a microcontroller.

Has anybody worked with these modules before, or can give me a few pointers? Just need to make sure I'm not missing stuff like decoupling capacitors, resistors etc.

Thanks