Connect with us

Korg D3200

Discussion in 'Troubleshooting and Repair' started by Mark2000, Jun 27, 2015.

  1. Mark2000

    Mark2000

    2
    0
    Jun 27, 2015
    I purchased an adapter for this audio recorder that would allow for a VGA output from 2seemy.com.
    after installing, it did not work. and I thought I smelled burning electrical.
    I removed it, then plugged the original ribbon cable back into the board.
    The built-in screen now does not function. It lights up white, but no text or menus.
    the rest of the mixer appears to be working fine.
    I did not see anything burnt up on the circuit board.
    what is the most likely failure here?
     
  2. davenn

    davenn Moderator

    13,139
    1,704
    Sep 5, 2009
    hi there Mark
    welcome to EP :)

    can you please give us a proper link to the specific adaptor you got and tell us specifically how it connects to the Korg and presumably the other end goes into a standard computer monitor ?

    Dave
     
  3. Mark2000

    Mark2000

    2
    0
    Jun 27, 2015
    2seemy.com is the link
    It is flash site and has full install instructions with pictures.
    Thanks for the response.
     
  4. richardcurnow

    richardcurnow

    1
    0
    Mar 15, 2019
    March 15, 2019–
    Anything get resolved for this unlucky EP reader?
    Have any other 2Seemy users written in about their installs?
    —as I’m considering a 2Seemy purchase, I’m really interested
    in the outcome of Mark2000’s problem.

    Huge thanks to anyone responding!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-