Connect with us

Kindling for the Fire

Discussion in 'Electronic Repair' started by Watson A.Name - Watt Sun, Sep 11, 2003.

  1. Ross Mac

    Ross Mac Guest

    I see your vocabulary has not expanded.....retard and dipshit.....So
    impressive!
     
  2. Ross Mac

    Ross Mac Guest

    So, Dark Manure....you must be the master of the Usenet...I will make sure
    in the future to follow all your suggestions and rules....yeah right....kiss
    my %$# pillow biter!!
    Get an efffing life and hey...your slimy hide is all over the news
    groups....and what a fool you have made of yourself...It appears your handle
    is Tard Boy....
    When you reach the rip old age of 14 perhaps you will gain a bit of
    wisdom......get a life loser!
     
  3. Ross Mac

    Ross Mac Guest

    Here we go again.....Tard Boy claims to be 43....yeah right...and his
    vocabulary...yup...the same....retard and dipshit...and his reference to
    school friends....well like I said...Tard Boy is in school.....hope the
    little bastard learns something!
     
  4. DarkMatter

    DarkMatter Guest

    Interesting that your LAME ass still ignored the actual subject of
    the post. The FACT that top posting is lame, and only ditzes top post.

    Particularly after they were informed that it is unacceptable. You
    epitomize usenet trolldom.
     
  5. DarkMatter

    DarkMatter Guest

    I am 43. I am an engineer, ya fuckin' 'tard.

    Like I said... I have done more in the past week to make the world
    a better place for mankind, than your lame, wussy boy ass will ever do
    in your ENTIRE lame, pathetic cringing little milksop life.

    You totally clueless bastard.
     
  6. Ross Mac

    Ross Mac Guest

    You really have a hard on for top posters....why, I cannot guess....I will
    make sure to always reply to your lame ass ON THE TOP.......
     
  7. Ross Mac

    Ross Mac Guest

    43....huh....could fool me.....and an engineer...hmmmm...what field???......
    Ya wonder bout me??? I am retired.....I made my fortune a few years back in
    electronics.....
     
  8. DarkMatter

    DarkMatter Guest

    Count yourself among the trolls, the retarded... the filtered.

    Be... as lame as you can be. Oooops... too late for you.
     
  9. Ross Mac

    Ross Mac Guest

    Get your rocks off kid.....hope it feels good!
     
  10. Ross Mac

    Ross Mac Guest

    You claim to be a 43 year old engineer....Ok....I will give you the benefit
    of the doubt...Let's say I have a 28 volt DC motor and want it to control a
    mechanism to a tenth of a mil....what type of controller and encoding system
    would you use?.....Any close answer will do.....
    You won't be able to find the answer to this one on google!......show me the
    intelligence!!!.........Your good bud.....Ross
     
  11. DarkMatter

    DarkMatter Guest


    You're a retard.

    I manufacture Piezo motors and control systems that operate in the
    100 to 1000 micron range. The amplifier that excites them are 1.5kW,
    800V
    EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
    wafers each, and an LVDT is used to determine position in real time,
    as the lathe head it gets used on can cut optical quality surfaces on
    the first pass. It can also cut a square peg from a round pin on a
    spinning lathe. Use your dim wit to figure that one out.

    Your little tenth of a mil baby bullshit is child's play by
    comparison. Laser etched optical rules, and magnetic types are
    nowhere near the resolve of these machines. They even detect and
    remove backlash artifacts from the lathe head, and lathe machinery.

    Gotcha! Not that *that* was any chore.

    Learn how to refrain from top posting, retard boy. It is as simple
    as that.
     
  12. Ross Mac

    Ross Mac Guest

    I think your comment on "baby bullshit" explains you quite well. Do you
    behave this way at work? And the answer to the question I posed is a
    non-answer. It is a description of an entirely different device. I guess you
    read spec sheets for a living. Somehow I don't think you would want to
    control a 28vdc motor with an 800volt amp. The question I posed to you was
    simple. I tried to keep it that way as to not confuse your simple mind. I
    didn't think we had to design the space shuttle! Nice try kid. You tout
    yourself as an adult professional and all I see here is a childish mind.
    And hey, what is this bizarre problem you have with a top post. You have to
    have some serious sickness within yourself to continue on this quest.
    Perhaps your handle should really be "Don Quixote" since you like to battle
    windmills. Why don't you start and moderate your own newsgroup. Should we
    call it alt.darkmanure.pinhead.troll ?
    Get a life skippy.....Ross
     
  13. Fleetie

    Fleetie Guest

    I think we have a winner.

    Now THAT was an interesting post.


    Martin
     
  14. Ross Mac

    Ross Mac Guest

    Look closely at the reply....he never answers the question he just starts up
    his diatribe again!
     
  15. DarkMatter

    DarkMatter Guest


    I didn't answer your question. I did, however, put your piddly
    little control technology to shame, and the goal you were after was to
    query my electronic abilities. It appears that it is YOU that
    attempts to circumnavigate the facts at every turn. That is true from
    usenet posting protocol perspectives, all the way through the fact
    that I did give an answer that should have cleared up your pussy wussy
    doubts.

    Face it, old man... you cannot stand the fact that you post like a
    little mosh pit punk on usenet.

    Got clue?
     
  16. Ross Mac

    Ross Mac Guest

    What made you think I was old....retired does not = old. It means I already
    made my bucks and am enjoying a great lifestyle.......You are, however, are
    in the rat race.....with all your genious!.If you are such a genious why do
    you have to work?..A lot of rhetoric here but no answer to the
    question.....if you are so smart...answer it......I know..you never
    will...you will just keep posting your usual "retard" and "dipshit" remarks
    .....enjoy it ....I am sure it gives you great satisfaction!
     
  17. Ross Mac

    Ross Mac Guest

    How bout an answer genious!....It will never happen....
    Call your teacher...maybe he can answer the question....the more days it
    goes the more it appears you do not know your craft...
     
  18. Ross Mac

    Ross Mac Guest

    Exactly...you did not answer the question!.....You could not...the best you
    could do was to post another technology.....you called it simple...but you
    never answered......
     
  19. DarkMatter

    DarkMatter Guest


    Learn to spell, retard boy. It's genius, dumbass!
     
  20. Ross Mac

    Ross Mac Guest

    That's it huh?....one of your two words......retard and dipshit....
    Well the answer to the simple question I posed is this:
    If you really want to control a 28vdc motor you would use a 65 volt PWM amp
    with a choke to dump off the excess voltage and any linear scale or rotary
    encoder would do for positioning....Servo lock is obtained by balancing out
    the duty cycle on the plus and minus sides of the signal..not a tough
    question at all......but after all, you said you were a PE....that is 70's
    technology! Tens of thousands of CNC machines are in the field with this
    technology. Do you want to send me another brochure?.....That's all your
    previous post was...and hey..thanks for the spelling correction....my degree
    was Technical....as yours seems to not be!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-