Connect with us

Key Counter/Clocker?? What to use?

Discussion in 'General Electronics Discussion' started by electric101, Apr 25, 2011.

  1. electric101

    electric101

    9
    0
    Apr 21, 2011
    Hi all,

    I am in need to designing an override for my RFID ignition; so if I misplace my chip while on the road, I can manually override the RFID module.

    My idea is this: Use a "PIN" to activate the RFID latch board I made. The PIN could be input using the strokes of my turn signal switch. It has both LEFT and RIGHT movement, so I would think you could program this? IE: L - L - R - L , and the latch board is powered on as if the RFID chip was just clocked.

    Any help pointing me towards an IC/part to get started on this would be great.

    Thanks!
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,192
    2,694
    Jan 21, 2010
    PICAxe-08M
     
  3. electric101

    electric101

    9
    0
    Apr 21, 2011
    Thank you! Exactly what I was looking for.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-