S
Sidney
- Jan 1, 1970
- 0
Kenwood A/V surround receiver model:KR-X1000,year:1995 (I guess),when
unit shuts down shortly after being turned on upon visual inspection I
found the following parts were replaced before:
Q18=2SB1570
Q14=2SD2401
Q2=2SC4137
R10=10 ohm,1/4w was replaced with 9.4 ohm,1/4w
R6=10 ohm,1/4 was replaced with 9.4 ohm,1/4w
CP2=0.22 ohm,5w dual emitter resistor
so with troubleshooting I found that all of the above parts were bad
with the exception of R6 and CP2.So before I replace them I would like
common repair tips for this model.Thanks in advance.
Sidney
E-mail:[email protected]
Dartmouth,Nova Scotia
Canada
unit shuts down shortly after being turned on upon visual inspection I
found the following parts were replaced before:
Q18=2SB1570
Q14=2SD2401
Q2=2SC4137
R10=10 ohm,1/4w was replaced with 9.4 ohm,1/4w
R6=10 ohm,1/4 was replaced with 9.4 ohm,1/4w
CP2=0.22 ohm,5w dual emitter resistor
so with troubleshooting I found that all of the above parts were bad
with the exception of R6 and CP2.So before I replace them I would like
common repair tips for this model.Thanks in advance.
Sidney
E-mail:[email protected]
Dartmouth,Nova Scotia
Canada