Connect with us

Kenwood KR-V126R Crackling Sound And/Or Operational Help Needed

Discussion in 'Electronic Repair' started by Tim, Mar 21, 2007.

Scroll to continue with content
  1. Tim

    Tim Guest

    OK I had this neat little unit given to me. I do have the operators
    manual for it.

    The only problem it has is a crackling sound coming from the speakers.
    It is there no matter what function is selected and even when muted you
    can hear it faintly. It is not loud, but is there at various intervals.
    I'm thinking maybe a bad cap somewhere in the power supply circuit or a
    poor solder joint. I don't have a schematic, so I'm kinda in the dark
    here.

    On a unrealated matter, I cannot seem to get audio from the CATV source.
    When I select CATV I get lots of FM stations, but not the audio from the
    TV channels. Any help would be greatly appreciated.

    - Tim -
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-