kenwood amp automatically shuts off

[netwebcenter]

i have a kenwood amp that i have used for 4-5 years and lately it woul
randomly shut off by itself while in use. when it happens the powe
light would start flashing until i press power again then it would g
back to standby mode. if i press power one more time then it goes bac
on. depending on my luck, it would either stay on or turn back of
after 3 seconds.

has anyone experienced the same thing? please help cuz i'm a newbie!
thanks

 

[Arfa Daily]

Either bad joints in the output stages, or a bad speaker / wiring. Any
disturbance in the outputs, or significant drop in load impedance, will
result in this protect mode engaging

Geoff

 

[Donald]

Make sure your speakers are 8 ohms, if they go any lower, like from
paralleling speakers, that will drop the ohms to 4.
Which can trip the amp.

----- Original Message -----
From: "netwebcenter" <[email protected]>
Newsgroups: sci.electronics.repair
Sent: Monday, August 15, 2005 2:18 PM
Subject: kenwood amp automatically shuts off