Connect with us

KDS K780 Monitor Problems

Discussion in 'Electronic Repair' started by Cory Windsor, Sep 29, 2004.

Scroll to continue with content
  1. Cory Windsor

    Cory Windsor Guest

    I have a KDS @view monitor (K780) that suddenly started smoking. After
    inspecting the monitor I find that one of the resistors on the main
    board near the connector for the yoke is burning out. I replaced the
    resistor... but it burns itself out again. However, when the connector for
    the yoke is removed the resistor is fine. Does anyone have any more info
    on this, or possibly a schematic for this particular monitor?

    Cory Windsor
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day