Maker Pro
Maker Pro

JVC Vertical fold

D

deepMacsonar

Jan 1, 1970
0
I have a JVC D-Series TV with a video problem. The top 1 1/2" of the
screen is black but the part of the picture that is supposed to be
there, is like upside down. It's like the top 1 1/2 of the picture has
been folded over.

Taking off the back I see NO little screw pots to adjust things, and I'm
wondering if there might be an on screen adjustments or..other
Otherwise would this be an expensive fix


RMan
 
R

RonKZ650

Jan 1, 1970
0
Why does everyone want to "adjust" every problem out? This is a pain in
the ass when people fool with adjustments. There is a 100uf capacitor
near the vertical output IC that is bad. Not a terribly espensive
repair.
 
K

kip

Jan 1, 1970
0
Because most people are STUPID...They dont understand its got a Fault.

I just spent nearly 2 hrs on a Toshiba CF32E50 because
the customer got the info off the Web and started playing around in the
service menu,s
The fault was a bad STR-Z2151 that had screwed the EPROM Data
caused from an Electrical Storm.

He payed .
 
J

JR North

Jan 1, 1970
0
For the same reason everyone thinks a car electrical fault is a 'fuse'. :)
 
Top