Connect with us

JVC VCR #HRS4500U: Powers Down After 3 Secs.

Discussion in 'Electronic Repair' started by rocker, Nov 12, 2003.

Scroll to continue with content
  1. rocker

    rocker Guest

    Hello everyone,
    I have a JVC VCR Model #HRS4500U that whenever I push the power button it
    comes on for exactly three seconds and then shuts off with "AUTO" flashing
    in the display. This happens regardless of whether or not I have a tape in
    it. I have cleaned the mode switch and I have verified that the parental
    lock is disabled. Anyone seen this problem with JVC VCR's before? I am
    trying to repair this without a service manual/schematic too. Thanks for
    any assistance you can provide.

  2. rocker

    rocker Guest

    I forgot to mention that I have checked all the electrolytics in the power
    supply section with an ESR meter and they all checked good. Plus...I
    replaced the Voltage Regulator IC #LA5613.
  3. Hello Everyone,

    I have a similar problem with my JVC HRS 9500 s-vhs recorder.
    Could someone please tell me where the mode switch is located?

    Thank you.

  4. Sofie

    Sofie Guest

    Natinderjit Atwal:
    Under the rail cam and slide gear.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day