Maker Pro
Maker Pro

JVC Tv and JVC Video.Problem

P

Peter Coddington

Jan 1, 1970
0
Recently purchased a JVC (HV-28P37SJE) Television and a JVC (HR-V617EK)
video.
The seem compatible as they have theTV Link installed.
I now find that if I am viewing Channel 2 on the TV in the normal mode and I
switch the Video on ( from showing the clock to a programme number) the
channel 2 I am watching drops to Channel E2 on the AVG mode.
The picture is unwatchable, fuzzy, or not shown at all.
The TV man delivered the TV and installed it. I later connected the Video .
Having a remote for the video with 36 options and after a sleepless night I
can now use it to record and play back.
Where have I gone wrong with the Channel 2 programme?
(Just found this Newsgroup, hope I am on the right one)
Peter.
 
J

JVC dude

Jan 1, 1970
0
The video is not tuned to the same transmitter as the tv. I suggest you do
an autoset on the video again, and if no better manually check and retune
the stored channels.

AW
 
N

NSM

Jan 1, 1970
0
| The video is not tuned to the same transmitter as the tv. I suggest you
do
| an autoset on the video again, and if no better manually check and retune
| the stored channels.
|
| AW

He is in the UK. Their channel system is very strange compared to the USA -
very, VERY strange.

N
 
J

JVC dude

Jan 1, 1970
0
I am in the UK and to us with just the 1 UHF band things seem simpler
than all the piped cable channels you have over there.!

These machines are very easy to set up but will often be fooled when within
range of 2 transmitters, mixing up channels from each.
Also the Downlink transfer between tv & vcr hardly ever works correctly.

AW
 
P

Peter Coddington

Jan 1, 1970
0
JVC dude said:
I am in the UK and to us with just the 1 UHF band things seem simpler
than all the piped cable channels you have over there.!

These machines are very easy to set up but will often be fooled when within
range of 2 transmitters, mixing up channels from each.
Also the Downlink transfer between tv & vcr hardly ever works correctly.
Many thanks, 'Downlink' may be the ;problem
Peter.
 
N

NSM

Jan 1, 1970
0
| I am in the UK and to us with just the 1 UHF band things seem simpler
| than all the piped cable channels you have over there.!
|
| These machines are very easy to set up but will often be fooled when
within
| range of 2 transmitters, mixing up channels from each.
| Also the Downlink transfer between tv & vcr hardly ever works correctly.

In the US/Canada channels stay where they are, you can't move them around!
It's a very simple system.

N
 
Top