Connect with us

JVC S-VHS AV grounding

Discussion in 'Misc Electronics' started by Darren Stanley, Nov 10, 2003.

Scroll to continue with content
  1. Can anyone say why JVC would be grounding the RF modulator and AV ports
    (SCART connectors) to the video decks metal case?
    Would performance be any better if this ground system were defeated?


    Darren
     
  2. Tim Kettring

    Tim Kettring Guest

    I dont know , but just hate chancing a design change that could introduce
    problems .

    tim
     
  3. Mjolinor

    Mjolinor Guest

    Are you saying they are grounded or do you mean they are connected to the
    metal work of the VCR. They are connected together so you don't get a
    voltage difference between them. They are also (probably) floating somewhere
    around 100 volts depending on the PSU design of the video, unless it has a
    three wire plug on and I don't think any domestic VCRs have nowadays.
    Performance is not likely to be any better with the metal parts seperated,
    not that I can see anyway.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-