Connect with us

JVC HR-S7955 not powering on since power cut/surge

Discussion in 'Troubleshooting and Repair' started by newgen2005, Sep 3, 2018.

  1. newgen2005

    newgen2005

    3
    0
    Sep 3, 2018
    2 of my JVC VCR's no longer power on since we had a power cut yesterday. There must have been some sort of power surge which as killed them.

    Can anyone suggest any things to check? I have checked the fuse inside the VCR and that is OK, in fact my voltage stick detects voltage all round the circuit board.
     

    Attached Files:

  2. kellys_eye

    kellys_eye

    4,281
    1,144
    Jun 25, 2010
    Your voltage stick will only detect AC - the input to the primary side of the PSU. DO you have a test meter to check the OUTPUT of the power supply section?
     
  3. newgen2005

    newgen2005

    3
    0
    Sep 3, 2018
    Thank you for replying Kellys_eye. I do have a Multi Meter. Are you able to point me in the right direction? as I don't know where to start!
     
  4. newgen2005

    newgen2005

    3
    0
    Sep 3, 2018
    I have checked for voltage across the fuse and there is nothing.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-