Connect with us

JVC camcorder viewfinder specs WTD

Discussion in 'Electronic Repair' started by Philip Pemberton, Aug 9, 2003.

Scroll to continue with content
  1. Hi,
    I'm currently trying to modify a pair of JVC viewfinders (models VF-C7E and
    VF-V45E) to accept an external video signal. I've been told that the VF-C7E
    viewfinder came from a JVC GR-C7E camera and the VF-V45E came from a JVC
    GR-45E camera. Does anyone have a service manual for these cameras? If so,
    I'd like a copy of the section that covers the viewfinder, if that's
    possible. Failing that, pinouts would be REALLY useful...

    Thanks,
     
  2. dranoweb

    dranoweb

    1
    0
    Feb 20, 2011
    Pinouts

    Hi, I'm doing the same but only have one - I need a second viewfinder.

    red: + 9vdc
    black: Power Gnd and Video Gnd
    White: Video in.

    yellow: SVID (unknown)
    Brown: SVID (unknown)

    it seems to work ok just using the white, but you can check pinouts.ru for information on a composite to svid adaptor.

    I beleive one of the two remaining will need to be ground and one will need a 47pf capacitor (ceramic) across the video signal.

    but again, I'm not bothering as it works well using composite on the white.

    If you can point me to a source where i might find another identical viewfinder it would be great.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-