JVC Cam coder not charging or no light(GZ-HD&AG)

[rajkumarsree]

Dear Experts @ Friends,
I ahve question regarding my JVC camcorder (GZ-HD&AG)

I have not used quite some time about 4 months, and i want to use again so i started charging and checkin next morning

there is no light or charge , i changed to other batter the result is same

what would be the reason please advice and thanks

Regards
Raj

 

[(*steve*)]

1) Did you turn on the charger?

2) Is it the correct charger?

3) Did you plug the charger in correctly?

4) is the battery correctly inserted?

5) did your leave the device turned on when you put it away?

6) was the battery flat when you put it away?

7) what sort of battery is it? (LiIon, NiCad, NiMH, Lead Acid, etc.)

 

[rajkumarsree]

Dear Steve,
Pls find my answer for your questions

1) Did you turn on the charger? - yes

2) Is it the correct charger? - yes

3) Did you plug the charger in correctly? - yes

4) is the battery correctly inserted? - yes

5) did your leave the device turned on when you put it away? - yes i guess but not sure

6) was the battery flat when you put it away? - yes flat

7) what sort of battery is it? (LiIon, NiCad, NiMH, Lead Acid, etc.) - Lilon

Thanks
Raj

 

[(*steve*)]

Great.

Lithium Ion batteries can be very intolerant of over-discharge.

If you have a multimeter, try measuring the voltage on the terminals of the battery. There may be several connections, just keep trying various combinations until you see the highest voltage (don't worry if it's negative or positive).

If you fail to see any voltage, you may have a dead battery. If you see some multiple of about 4V, but less than the battery's stated voltage, a cell has probably died.

If you can beg, borrow, or steal another battery, try that and see if it is the problem.