T
TA7205
- Jan 1, 1970
- 0
Hi;
This GR-DVL125 came in with no backlighting for the LCD.
Found open SMD on inverter board. It was burned
so I couldn't tell if it was a resistor or a protector.
There is no location num.
I subbed a 10 ohm resistor in and it seems to be
acceptable in brightness.
Anybody got advise ?!,
Rick
This GR-DVL125 came in with no backlighting for the LCD.
Found open SMD on inverter board. It was burned
so I couldn't tell if it was a resistor or a protector.
There is no location num.
I subbed a 10 ohm resistor in and it seems to be
acceptable in brightness.
Anybody got advise ?!,
Rick