Maker Pro
Maker Pro

JVC AV20cm3 clock display stuck

G

gina

Jan 1, 1970
0
I don't have the original remote for this TV and the universal doesn't
allow me to access the function menus. Originally, I was just trying to
program the channels into the TV. I found that when I press the
"function" and "volume down" buttons together, the screen shows the JVC
Master Command and the Feature Demonstration menus. Then it
automatically starts going through a demo by itself. Since it did this,
the clock display is now always on in the lower right hand corner. Is
there anything I can do to fix this withouth ordering a remote?
 
T

tvguy

Jan 1, 1970
0
You may want to go to www.moteva.com and check up on the jvc remote
they have there. Moteva remotes are very good and much cheaper tha
the original remotes and will do all the funtions that a origina
remote does. Much better buy than any universal remote that I hav
seen on the market
 
C

Cliff Top

Jan 1, 1970
0
The I (info) button turns the clock on/off, so you need a remote with
that button on.
 
Top