Connect with us

JK flip flop circuit power problem

Discussion in 'General Electronics Discussion' started by Jasmeet Kaur, Apr 27, 2011.

Scroll to continue with content
  1. Jasmeet Kaur

    Jasmeet Kaur

    3
    0
    Apr 24, 2011
    I am using 74LS112N JK flip flop, and i'm giving 5 volts to the circuit using 7805, which becomes extremely hot, when the circuit works. I have connected 0(GND) to CLR, K=0,J=1 CLK=1, PRcomplement=1, what could be the problem? When I give an i/p of 12V, the i/p that reaches 7805 is just 3.8, and also it becomes unbearably hot..
     
  2. Resqueline

    Resqueline

    2,848
    2
    Jul 31, 2009
    You have made a wrong connection. Show diagram/ drawing/ picture for resolution.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-