Maker Pro
Maker Pro

jittery mouse fix

kellogs

Jan 7, 2014
88
Joined
Jan 7, 2014
Messages
88
Hi,

I have this Genius Navigator 535 mouse that jitters as I move it. The higher the DPI the more the jitter. Rubbed its lens clean, used it on two machines and 5 OSes, even with custom made drivers for it. all the same - so I am pretty sure this is a hardware issue.

That being said, I have my solder gun and multimeter and I'd like to repair this myself. Of course, if I knew what part is broken...

So if anyone can help, here are some pics:

ms90.jpg


onsj.jpg


cijg.jpg


386b.jpg



Thanks!
 

jcurrie

Feb 22, 2011
128
Joined
Feb 22, 2011
Messages
128
have had several optical mouses and all of the jiter problems were related to the lens being either dirty(most common ) or scratched.
 

kellogs

Jan 7, 2014
88
Joined
Jan 7, 2014
Messages
88
have had several optical mouses and all of the jiter problems were related to the lens being either dirty(most common ) or scratched.

you have made me pul out the magnifying glass... no scratches, just weird geometry. Cleansed again and all is well. Thanks!
 

batkin

Jul 23, 2013
9
Joined
Jul 23, 2013
Messages
9
Look for a hair in the hole in the bottom of the case where the laser shines out.
 
Top