Connect with us

Jig mount for camera

Discussion in 'General Electronics Discussion' started by mrel, Nov 5, 2010.

Scroll to continue with content
  1. mrel


    Jul 2, 2008

    Try to build jig to mount a camera that can pan and tilt.
    I try a stepper motor the motor don't want to turn when weight is heavy .
    My next try is to use a servo motor ,but I don't know to much about servo motor.
    I have few question about servo motor.
    (1) Can a servo motor goes left to right and right and left ?
    (2) Where can I find simple circuit to control the servo motor?
    (3) Can PWM control a servo motor?
    Thank for the infor
  2. Resqueline


    Jul 31, 2009
    Balancing out the weight is one way of solving the problem, gearing is another.
    (1) Yes. Question; do you just require a simple continuous sweep back & forth, or a precise controllable position?
    (2) Google.
    (3) Yes.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day