Connect with us

Jamming Video Signals?

Discussion in 'Security Alarms' started by DavidB, Jun 19, 2004.

Scroll to continue with content
  1. DavidB

    DavidB Guest

    Is it possible to jam the signal being sent to a closed circuit camera
    which is recording to a VCR?
  2. Aegis

    Aegis Guest

    Not any camera I've installed... You installing those Sam's Club cameras?
  3. Julian

    Julian Guest

    Cameras.... i helped my old boss's father install them down at his car lot
    in what is becomming a pretty awful area. Before the cameras people were
    stealing/vandalizing cars . Now with the cameras they look up, and wave and
    still do it.
    Wtf do you show a cop? hey officer we got this video of a black guy in a
    hoodie stealing the car.
  4. Aegis

    Aegis Guest

    Nope... You turn on motion detection in the DVR menu, set up your
    active/masked zones and tie an alarm output into the panel.
  5. petem

    petem Guest

    i know some will not like it...but you forgot about laser...

    a laser pointed directly to a auto iris lens will make the autoiris if the embiant light is low you are now recordind a very bright
    spot on a almost black background....

    this is in used here by a group...they are very cleaver...

    the laser need to be a bit more powerfull then the one you use for pointing
    in reunion or the sort..( i tried) something more like a good aiming laser
    for guns...

    wont make a big diff on non auto iris cam...
  6. Frank Olson

    Frank Olson Guest

    Speaking of "dumb", have you read the PowerMax installation manual yet?? I
    wouldn't want you to look stupid the next time someone asks a question about
    it... You're a "maroon", Robert!! ;-)
  7. rory

    rory Guest

    yall forgot one, sit out of the cameras view, and using a paint gun,
    shoot a pelet at the camera's lens/housing, so it cant see anything, I
    would have thought this is actually the easiest and most effective
    method! :)
  8. rory

    rory Guest

    just need a good scope :)

  9. Aegis

    Aegis Guest

    Or a lot of paint balls... btw, some enclosure manufacturers actually
    advertise that paint balls won't block their lense windows...

  10. Jackcsg

    Jackcsg Guest

    I know. They're the same guys that smoked a lot of weed in Collage but never
    really inhaled, while they dodged the war in Vietnam. I hear L.A. has the
    same technology towards graffiti.

  11. Aegis

    Aegis Guest

    I just did a search for paint resistant camera enclosures and got this as
    one of the returns...

    Videolarm makes one with a proprietary paint shield...

    all that aside, doesn't this guy's catalog look EXTREMELY similar to ADI's?
  12. rory

    rory Guest

    only thing i could think of is an auto sensing washer wiper on the
    enclosures glass cover. OR maybe some rainex like used for car windows
    against rain! :)
  13. Jackcsg

    Jackcsg Guest

    So now I'm a cartoon character. Well I'll put it a little more simply for
    you. The paint will stick, or leave some sort of impairment, whether it be a
    film, or residue on the enclosure lens. You climb your ass up there, and it
    will wipe off removing the impairment (That's Resistant).
    Assuming your playing a scene in your head that a simple enough
    answer, there Butthead? I can do some South Park too...

  14. Jackcsg

    Jackcsg Guest

    I would never pick on Mike...he might kick me in the nuts.
  15. Spike

    Spike Guest

    We hoo... I finally made it to the Bass side swipe list.
  16. Frank Olson

    Frank Olson Guest

    Welcome!! We're starting a club... with annual pilgrimages to whiz into a
    swimming pool in Sarasota and enjoy a good old fashioned driveway BBQ. Please
    remember to state your beer preference when filling out the membership form.
  17. Spike

    Spike Guest

    We should start a contest or something...
    ** who on the newsgroup would you most like to meet face to face? **
    and we could all chip in to make it happen for the winner.
    and wouldn't ya know it, they'd meet at the one place Jack didn't have a
    camera installed
  18. Jackcsg

    Jackcsg Guest

    Good lord, I'm never going to live that down, am I? From now on I will not
    talk about any activities unless I have the proof on video. I'm going to
    install a helmet cam on my hard hat so that future events will be recorded
    accurately. Spike I know you have a hard hat with two can holders, and a
    dispensing system. I can't prove it of course, but I can picture it on your
    I'm in on the contest long as I'm allowed to bring my pipe
    bender....we can recreate the whole scene on the winner. (and record it)

  19. Mark Leuck

    Mark Leuck Guest

    Go ahead, Mike won't do anything except add you to a web page
  20. Norm Mugford

    Norm Mugford Guest

    Bass wrote:
    "Face to face I'm a pretty nice guy."

    Another lie

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day