Connect with us

Issue programming Atmel 89C51RC2-UM

Discussion in 'Microcontrollers, Programming and IoT' started by Userdenied, Oct 4, 2012.

  1. Userdenied

    Userdenied

    2
    0
    Oct 4, 2012
    Good Morning,

    I want to start by throwing out there that I only have a very intro level knowledge of microchip programming. I fell into this project because my boss tossed it in my lap because IT is a very inclusive word for him.

    Anyway, my Company repairs business telephones and phone systems. We have a chip our engineer thinks is the problem so we are trying to replace it. The chip is an Atmel 89C51RC2-UM. I have blank chips, and a BK Precision 866B programmer to work with.

    So far I have only been able to read from the chip. When I attempt to copy the programming onto a blank chip it halts at 0% or 25% depending on what programming options I select.

    Anyone here that could help me figure out this issue would have my gratitude. If you need any more info let me know and I will do my best to provide it.
     
  2. Userdenied

    Userdenied

    2
    0
    Oct 4, 2012
    Well, figured out the issue. I guess I needed to blank the chip before making an attempt to write to it even though they were blank?

    Anyway, nevermind my question.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-