Connect with us

ISO >1000V six mosfet/IGBT package for 2-5A service. Hermetic is preferable

Discussion in 'Electronic Components' started by Mook Johnson, Mar 12, 2007.

Scroll to continue with content
  1. Mook Johnson

    Mook Johnson Guest

    I've seen these before for 3 phase motor drive use. Its a metal can with
    six mosfets in it that bolts directly to the heatsink. Pins on the top of
    the package (or from the sides and angled upward) go through a PCB directly
    over the package.

    Anyone knows who carries this type of beast? I've seen the big monsters
    that carry 20- 200Amps but I need something physically narrower. like 1inch
    wide max length less than 4".

    I'm trying to avoid mounting 6 mosfets individually if possible.

    thanks
     
  2. Ray King

    Ray King Guest

    Try, irf.com

    Ray
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-