Connect with us

Is TVS diode fast enough to protect MCU ?

Discussion in 'General Electronics Discussion' started by teajr37, Mar 31, 2021.

Scroll to continue with content
  1. teajr37

    teajr37

    1
    0
    Mar 31, 2021
    Is TVS diode fast enough to protect MCU from MOSFET malfunction (mosfet, CMOS, TVs, electronics)?
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,974
    2,803
    Nov 17, 2011
    It depends on how it is used and what kind of failure happens. Usually additional current limiting resistors will be used. TVS are suitable for suppressing pulses only. If a failure leads to permanent overvoltage, the TVS will in most cases be destroyed.
    Look into the application section of the datasheet of the TVS.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-