Connect with us

Is this repairable?

Discussion in 'PCB Layout, Design and Manufacture' started by electro_ken, Sep 9, 2021.

Scroll to continue with content
  1. electro_ken

    electro_ken

    4
    0
    Sep 9, 2021
    I have an old TT and this board was affected by rain leaking into the box, stupid design as there are no drain holes so part of the board was literally bathing in rain water.

    Some pics attached of what looks like the dammaged area. This smaller pcb sits on a main board full of relays etc which controls the electric windows etc. Thoughts appreciated!

    [​IMG]

    https://ibb.co/PzydX5G
    https://ibb.co/w6QZFYk
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,667
    2,700
    Nov 17, 2011
    Pictures do not show here. Upload them directly to the forum (note: size < 300 kB/picture). You can use copy paste for this (if necessary after resizing).
     
  3. electro_ken

    electro_ken

    4
    0
    Sep 9, 2021
    Thankyou Harald added them external now appreciated your advice.
     
  4. Bluejets

    Bluejets

    5,001
    1,050
    Oct 5, 2014
    Multiple failure and flashover points.
    Looks kaput.....
     
    electro_ken likes this.
  5. electro_ken

    electro_ken

    4
    0
    Sep 9, 2021
    Oh crappers feared the worst, cant the IC's be replaced?
     
  6. Bluejets

    Bluejets

    5,001
    1,050
    Oct 5, 2014
    I'd say the ic's (if you can identify them) are the least of your problems.
    The board is damaged and repair may be well nigh impossible.
    Also other components damaged as well.
     
    Last edited: Sep 9, 2021
    electro_ken likes this.
  7. electro_ken

    electro_ken

    4
    0
    Sep 9, 2021
    Appreciate your input here thankyou.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-