Maker Pro
Maker Pro

Is This Crossover Schematic Can or Cannot??..

Joemzkie

Feb 17, 2016
13
Joined
Feb 17, 2016
Messages
13
Crossover.jpgHi Guise this is crossover schematic, just wondering if it is ok with 500 watts amp to 500watts speakers??.. Thanks...
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Probably fine if the parts are suitably rated.
 

Joemzkie

Feb 17, 2016
13
Joined
Feb 17, 2016
Messages
13
You Mean this??..
  • Capacitor must be non-polar capacitor types with a voltage rating of 50 volt or more (preferably 100 volt).
  • Capacitor may be paralled to achieve specified values.
  • Inductors should be air core. Do not mount inductors in top of each other.
  • Resistors should be 100 Watts or more
 
Top