Maker Pro
Maker Pro

Is it possible to model a photodiode PIN InGasAS, in accord with datasheet, in simulator SPICE Micro

Weiseste

May 22, 2020
6
Joined
May 22, 2020
Messages
6
I want to know if it is possible to model a photodiode InGasAs panchromatic PIN , in accord with datasheet, in simulator SPICE MicroCAP 12.Because the supllier where I boughit it has not a SPICE model.And if it is possible, which are those steps. Here it is data-sheet https://www.tme.eu/en/details/ig17x1000s4i/photodiodes/laser-components/ And below I will attach a electric schematic, a transimpedance amplifier with phototdiode, used like receiver of smoke.I want to monitor graphically the impulse of photodiode in function of output of transimpedance for sensibilty. There is type of photodiode,which I found it in library Micro-CAP 12, it is simpe photodiode,which does not follow in accord in datasheet.There is photodiode macro.

Thank you.
 

Attachments

  • PHOTO_1.PNG
    PHOTO_1.PNG
    25.6 KB · Views: 1
  • PHOTO_2.PNG
    PHOTO_2.PNG
    27.5 KB · Views: 1
Top