Connect with us


Discussion in 'Electronic Design' started by Kasper, Oct 9, 2008.

Scroll to continue with content
  1. Kasper

    Kasper Guest


    I have added IRDA on one og my designs, but afterwards i figured out the
    ircomm is gone :(

    Can anyone come with a good/easy solution for getting data into the PC from
    my own uC?

  2. Kasper

    Kasper Guest


    Thank you for your reply.

    can you please be a litle more specific / link?

  3. aerelD

    aerelD Guest

    You could use rs232 - if you have a transceiver on your device. If
    not, I'm sure you could always find an I2C / SCI / SPI to serial
    device (use the serial port on your computer). Check Lantronix, as
    John suggested. They have lots of that type of thing.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day