Connect with us

IR ne555 receiver

Discussion in 'Radio and Wireless' started by NyLODA, Sep 14, 2018.

  1. NyLODA

    NyLODA

    3
    0
    Sep 14, 2018
    Hi, everyone. I am trying to build IR relay switch. I am using TSOP 1736 and ne555. I used one 555 as ir reciever and other one in bistable mode as flip flop switch. Everything works fine but sometimes i am getting first 555 false triggered. What can cause that and how i can fix it. I used similar schematic for ir reciever (I used TSOP 1736 instead 1738)as this one:http://gadgetronicx.com/wp-content/uploads/2013/10/receiver.gif
     
  2. Alec_t

    Alec_t

    2,487
    642
    Jul 7, 2015
    Welcome to EP!
    The circuit in the link is a monostable, not bistable.
    The TSOP1736 is for a 36kHz IR signal. What is your IR modulation frequency?
     
    Last edited: Sep 14, 2018
  3. NyLODA

    NyLODA

    3
    0
    Sep 14, 2018
    You didn't understand me. In the link is only first part of my circuit and I am having troubles with it. Output of the circuit in the link is fed into bistable flip flop switch.
     
  4. Alec_t

    Alec_t

    2,487
    642
    Jul 7, 2015
    The 555 circuit has a high shoot-through current when its output changes state. If your supply is not adequately decoupled its voltage can dip as a result and cause false operation of whatever it supplies. Try connecting respective 100uF caps across the supply terminals of each 555, as close as possible to the IC supply pins.
     
  5. NyLODA

    NyLODA

    3
    0
    Sep 14, 2018
    Ok, thanks i will try.
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.