Connect with us

IR Beaming Wavelength in Pocket PC

Discussion in 'Electronic Design' started by Robert Scott, Nov 1, 2007.

Scroll to continue with content
  1. Robert Scott

    Robert Scott Guest

    I am developing a device that will communicate with a Pocket PC IR port. What
    is the nominal wavelength for these ports? Most devices (IR LEDs and
    Photodiodes) fall into two broad categories: 880nm and 950nm. Which one is
    appropriate for the Pocket PC? There may be enough response to use either one,
    but I would rather be right in the middle of the filter passband than sitting on
    the side.


    Robert Scott
    Ypsilanti, Michigan
     
  2. [email protected] (Robert Scott) hath wroth:
    850 to 900 mn for IrDA.
    880 mn would be best.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-